Acrylic Resin

Tough, UV Stable and Colourful

Acrylic Resin Coatings Perth

Acrylic resin coatings are a great option when you need a tough, coloured, slip-reduction surface that can handle traffic, weather and UV. At Resin Republic, we install high‑performance acrylic and epoxy‑acrylic coating systems across Perth for paths, car parks, cycle lanes, walkways, sports areas and busy public spaces that need to be safe, visible and long‑lasting.

  • Chemical & Heat Resistant

  • Maximum Durability

  • Public Safety

  • Community Art

  • Premium Resin Technology

Acrylic Resin Solutions Across Perth

An acrylic resin coating is a coloured, liquid‑applied system that is rolled or trowelled onto concrete or asphalt, then dries to form a hard, textured surface. It is usually made from two components that are mixed on site and applied as a paste or thick paint. Once cured, it becomes a tough, non‑porous layer that grips underfoot and keeps its colour in the sun.

These coatings are designed for surfaces people walk or drive on every day. They work especially well where you need:

  • Bright colours for clear markings and zones
  • Good grip, even when the surface is wet
  • A finish that stands up to weather, UV and regular use

Common applications include:

  • Cycle lanes and bike paths
  • Pedestrian crossings, footpaths and walkways
  • Car park bays, drive lanes and ramps
  • School and campus paths
  • Retail and mixed‑use outdoor areas
  • Stadium and arena walkways and concourses
  • Surrounds to sports courts and playing areas
  • Pool surrounds and wet‑area paths (with the right system and texture)

It’s the ultimate balance of safety, style, and effortless upkeep.

Built for Community

Our flooring systems are engineered to withstand the toughest conditions while maintaining a premium, designer look.

High Grip

Filled with fine aggregates, this system has built in texture and grip even when wet.

UV Stability

Formulated to handle full full sun exposure and temperature shifts without breaking down.

Fast Cure

Minimal downtime with fast re-coat times and potential for return to full service within 24 hours.

Colour Range

Select from a huge existing range or pre-order specialty colours, the options or limitless.

HOW WE WORK

01.

ASSESS

Understand the current condition of your slab and future use. Then we recommend a resin based system.

02.

PREPARATION

We mechanically grind the surface, repair cracks and weak spots, and deal with moisture where needed.

03.

INSTALLATION

Primers, basecoats, flakes or aggregates, then the right topcoat for your environment, traffic and cleaning routine.

04.

HANDOVER

We give clear cure times and cleaning guidelines so the floor stays safe, hygienic and presentable.

Epoxy Flooring FAQs

When professionally installed, our resin systems are designed for extreme longevity. In residential environments, such as home garages or interior spaces, you can expect a lifespan of 15 to 20 years. Our flake flooring systems are applied up to 10 times thicker than standard retail DIY kits, providing industrial-grade durability for your home.

Yes. Safety is a non-negotiable part of our installation process. We use premium resins that comply with AS/NZ 4586-2004 slip-resistance standards. We can customize the level of “grip” or texture in the topcoat to suit specific areas like wet laundries, commercial kitchens, or steep garage ramps.

Maintenance is incredibly simple because the surface is completely non-porous and seamless.

  • Daily: A quick sweep or dust mop to remove grit.
  • Weekly: A damp mop with warm water and a pH-neutral cleaner.
  • Spills: Oil or chemicals can be wiped up immediately without leaving a permanent stain.

We specialize in surface transformation. While epoxy is designed to bond best with concrete, we can often apply it over tiles with the correct mechanical preparation. For cracked or pitted concrete, we use industrial-grade fillers to repair the substrate before coating, ensuring the final finish is perfectly level and smooth.

Most standard projects (like a double garage) take between 2 to 4 days to complete. This timeframe includes the critical diamond grinding preparation, base coat application, decorative broadcast, and the final protective topcoats. You can typically walk on the floor in socks after 24 hours and drive vehicles on it after 72 hours.

Standard epoxies can yellow over time if exposed to direct sunlight. To prevent this, we offer UV-stable polyaspartic topcoats. These high-performance coatings act as a “sunscreen” for your floor, ensuring the colors remain vibrant and the finish stays crystal clear even in Western Australia’s harsh UV conditions.